Anabond is a Chennai-based manufacturer of engineering adhesives and sealants. The company excels in making adhesives used across the nation to manufacture automobiles, electronics, and other engineering products. If you are looking for the best engineering adhesives for daily usage by Anabond, you are at the right place. In this article, we have highlighted 3 of the best adhesives in the industry by Anabond. Without wasting any more time, let’s get right into it.
Anabond 666
Anabond 666 is a kind of adhesive or sealant with a single element. Anabond 666 is a non-slumping, odorless as well as very low volatile silicone. It is made to give dependable on-the-spot gaskets or sealants for mechanical components subjected to higher temperatures. If exposed to moisture in the atmosphere, the product sets to produce a durable, malleable silicone rubber sealing. Without stiffening, contracting, or fracturing, the product withstands age, corrosion, and temperature cycling.
Specifications of Anabond 666:
Anabond 666 is a versatile gasket builder used to seal any vehicle engine, including timing panels, end seals, oil sump operations, piston covers, water pumps, intake chambers, rocker covers, and rear axle connectors.
This component can also be used to assemble and fix industrial burners, ovens, exhaust towers, boilers, and high-temperature pipework.
Anabond 666 can also be used for heating elements in electrical equipment as a gasket or adhesive.
Application method
The adhesive or the sealant can be used directly from the flexible pack or ejected from the tube.
To make the application more accessible, a plastic nozzle tip with a suitable aperture and size is provided.
Put a required amount of the adhesive or sealant uniform line in a constant width for preparing the surface.
Other important details:
The product is available in the package size of 100-125gm in a tube, 300gm in cartridges. Drums are also available for extra-large quantities. It is advised to be kept away from flammable products. Users should store it at 8-30 degrees celsius. It can be used for up to 9 months from its MFD.
Anabond 112
Anabond 112 is known as a high-strength adhesive. Anabond 112 is a single-component anaerobic hardening glue. They fix when implemented to bolts, resulting in fail-safe adhesive configurations that can endure strong vibration, stress, collision loads and provide greater functionality. Anabond 112 also works great with nuts and bolts.
Specifications of Anabond 112:
It is generally red.
They are mainly used in the cases of bolts and nuts.
Its viscosity lies between 275 to 325 cPs.
Application Method
It has a nozzle-like tip, through which users can easily apply the adhesive on the desired spot.
Press with equal pressure so that it can evenly spread over the surface.
With similar steps, it can be used anywhere.
Limitations
The product should not be kept near any continuous flammable products.
It should be kept in a place where it can get enough moisture from the air.
Other important details:
The Anabond 112 is available in a 50ml collapsible tube along with a nozzle tip. It also comes in 250ml as well as in a 3.5 ltr pack. The company advises not to keep it in a place that has a rising temperature or in direct sunlight. However, if stored at the right temperature, 25 degrees Celsius, it can be used for 15 months from its manufacturing date.
Anabond 102
Anabond 102 sealants are single-component solidify solutions that harden in a moisturizer medium to form a durable rubber-like substance that unites and seals components. In the engineering sector, they are highly utilized to substitute gaskets as an instant sealant. In addition, these can be applied in manifolds with more significant gaps, such as metal sheet coverings, oil drainage systems, and so on, because of their vital gap bridging capabilities.
Specifications of Anabond 102:
It usually comes in black color.
They are mainly used for industrial purposes.
It is a silicon-based adhesive.
Limitations
The product is to be kept in an excellent environment where there are no flammable goods.
Make sure it’s not kept in a small closed space where there is little air pressure.
Application Method
This product comes with a nozzle-like tip that can apply the effect on the desired surface.
It is mainly used on surfaces like caulking, joining, and glazing.
Users can just squeeze it and apply it to their desired location.
Other important details:
The Anabond 102 comes in a tube size of 250ml to 300ml. The company recommends keeping it under a cool and dry place away from direct sunlight. Users can use it up to 12 months from the date of production.
Conclusion
Adhesives are advantageous while manufacturing electronics and other engineering goods; they help keep both ends intact. In addition, adhesives by Anabond come with high quality making them ideal for manufacturing high-value goods. So, these were the 3 best products from Anabond for engineering adhesives. Any one of these will come out as ideal engineering adhesives for your usage.
Feel free to Contact Us if you have any questions, need more information or if you are interested in purchasing Engineering Adhesives. Tejwala Engineering Company is an industrial tool distributor based out of Madhya Pradesh.
Check out our Distributor section
Brands Tejwala Engineering Company Offers: Anabond
Comentarios